For easier configuration of GSM Controller we recommend use own software GSMControllerTools. It works with firmware 1_07 or later. Configuration can be proceed after installing USB drivers (only for Windows system, Linux don’t need), checking port in System Manager (Linux work automatically) and establish connection. In newer firmware 1_15 and up there are available new Config Table features for raising events like relay closing, email or SMS after condition on chosen input is filled. This feature will not be available to setup by GSMControllerToosl, only by commands from console line (also in this software). Other console software we recommend is CuteCom for Linux and Mac OSX systems.

SHORT MANUAL GSMv3

SHORT MANUAL DOWNLOAD

FIRMWARE GSMv3 1_11

DOWNLOAD

FIRMWARE GSMv3 1_12

DOWNLOAD

FIRMWARE GSMv3 1_15

DOWNLOAD

FIRMWARE GSMv3 1_16

DOWNLOAD

FIRMWARE GSMv3 1_21

DOWNLOAD